EV Charger Installation in San Ramon, Danville, Walnut Creek & the East Bay
Crow Canyon Electric installs home EV chargers in San Ramon, Danville, Blackhawk, Walnut Creek, Berkeley, Oakland, Alameda, Livermore, Pleasanton and Fremont. We check your panel, run a dedicated circuit, mount the charger and test it, so you can plug in at home instead of waiting at a public station.
EV Charger Installation done properly, start to finish
Charging at home is the easiest way to own an electric car, but only if the circuit behind the charger is right. A Level 2 charger needs its own dedicated 240-volt circuit, the correct breaker and wire size, and a panel that can carry the extra load. Getting that wrong means tripped breakers, slow charging or a charger that never works as advertised.
Crow Canyon Electric starts with the panel, not the charger. We look at what your service can handle, plan the shortest clean route for the wiring, and mount the unit where the cable reaches your car. The photos on this site show real garage and exterior-wall installs, with conduit run tidy and the cable coiled off the floor.
EV Charger Installation services we offer
- Site visit and load check of your electrical panel
- Dedicated 240-volt circuit and breaker
- Conduit and wiring sized for the charger
- Wall mounting in the garage or on an exterior wall
- Weatherproof exterior installs
- Charger setup and testing
- Panel or sub panel upgrade when capacity is short
- Permit and inspection guidance for your city
When to call
- You just bought or leased an electric car
- A standard outlet charges too slowly
- Your garage has no 240-volt circuit
- Your panel is full or already near its limit
- You want the charger on an outside wall or driveway
A finished ChargePoint install
A short clip from one of our EV charger jobs: wall-mounted unit, coiled cable and conduit run down the siding.
EV Charger Installation in the field



What happens after you call
Call or send a request
Tell us what you want to do. Call (510) 650-9113 on a weekday or use the form, and we arrange a visit.
Look and plan
We look at the panel, the wiring and the space, listen to what you want and explain the scope and options.
Permits and scheduling
We plan the work, handle permit and inspection steps and schedule around you and your contractor.
Install, test and walk through
The work is installed, tested and cleaned up, and we walk through the result with you.
EV Charger Installation across the East Bay
Crow Canyon Electric provides ev charger installation in San Ramon, Danville, Blackhawk, Walnut Creek, Berkeley, Oakland, Alameda, Livermore, Pleasanton and Fremont.
EV Charger Installation FAQ: common questions
Straight answers about ev charger installation from Crow Canyon Electric, serving San Ramon, Danville, Walnut Creek, Berkeley, Oakland, Alameda, Livermore, Pleasanton, Fremont.
- EV charger installation near me
- home EV charger installer
- Level 2 charger installation
- 240-volt outlet for an electric car
- electric car charging station installation
- garage EV charger electrician
- EV charger panel capacity check
Yes, Crow Canyon Electric is a Tesla Certified Installer, and Jerry Reynoso has been a union electrician for 25 years. We install chargers for Tesla and other electric cars.
Many straightforward installs are a same-day job once the plan is set. Longer runs, finished walls or a panel upgrade take more time. Call (510) 650-9113 and we will explain what your home needs.
It depends on the panel size and what else it is already powering. We check the available capacity first. If it is short, a main panel or sub panel upgrade is the usual fix.
Yes. Outdoor installs use weatherproof equipment and conduit. Our job photos include chargers mounted on exterior siding and stucco.
San Ramon, Danville, Blackhawk, Walnut Creek, Berkeley, Oakland, Alameda, Livermore, Pleasanton and Fremont, within about 25 miles of our base in San Lorenzo.
The price depends on how far the charger is from your panel, the wire and breaker size, whether walls must be opened, and whether your panel needs more capacity. We quote after looking at your panel and garage. Call (510) 650-9113 for a quote.
Level 1 uses a standard 120-volt outlet and adds range slowly. Level 2 uses a dedicated 240-volt circuit, like a dryer, and charges much faster. Most home owners choose a Level 2 wall charger.
Both work. Some chargers plug into a 240-volt outlet and others are hardwired to a dedicated circuit. We recommend one based on the charger you bought, where it will be mounted and your preference.
Tell us the brand and model you chose when you call (510) 650-9113 and we will confirm what the installation involves. Our job photos and video show a wall-mounted ChargePoint unit.
Some utilities and programs offer incentives, and they change over time. Ask your utility or program before you buy. We can describe the installation for your application.
More from Crow Canyon Electric
02Main Panel Upgrades
Replace an outdated or overloaded main panel with a safe, higher-capacity one built for today’s loads.
Explore Main Panel Upgrades
03Sub Panel Upgrades
Add breaker space for a garage, ADU, workshop or addition without replacing the whole main panel.
Explore Sub Panel Upgrades
04Electrical Remodels
Rewiring, new circuits, outlets and updated panels for kitchens, baths, additions and whole-house remodels.
Explore Electrical RemodelsGuide · 4 min readInstalling a Home EV Charger: What the Electrical Work Involves
A Level 2 home EV charger needs a dedicated 240-volt circuit and a panel with enough spare capacity.
Read the guideReady to talk about ev charger installation?
Call (510) 650-9113 or send a request. Jerry will arrange a visit to look at the work and explain your options.

